Cricut's World
Thickness: 450 microns
Pressing: 160/170°C - 15/17 seconds - Medium pressure
Washing: 40°C - Iron on reverse side
- Washing - 40°C
- Specific effect - Velvet
- Inks compatibility - Eco-solvent / solvent, Latex
- Textile compatibility - Cotton, Polyester, Polycotton, Acrylic
- Tape - Flock Tape
- Certifications - Oeko-Tex
- Ironing - On reverse only
1. Printing and cutting
Prepare to print the pattern right side up following the printer operating instructions.
- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flock from the printer and let it dry at room temperature for at least 4 hours. .
2. Hot transfer
- Weed the excess material
- Use a tape application to transfer the pattern (do not use a paper tape application).
- Position and press the pattern onto the fabric with medium pressure, protected by silicone paper at 165 ° C - 17 seconds - Medium pressure.
- Remove the hot polyester.
Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only
Storage: maximum 1 year, vertically and protected from light and humidity
Washing: maximum 40 ° C inside out
Do not use aggressive products (bleach, etc.)
Tumble dryer: No
Dry cleaning: No
