Firstmark

1. Cutting the Film in Mirror Mode

• Before cutting, set up your cutting machine to work in mirror mode. This step is essential because the marking will be applied in reverse to ensure it is correctly oriented once transferred onto the textile.
• Use a flex blade suitable for cutting heat transfer vinyl and precisely adjust the blade depth according to the material's thickness. This ensures a clean cut without damaging the polyester backing layer.
• Ensure that the blade settings optimize precision, especially for fine details of the design. It is advisable to perform a test cut before starting full production.

2. Weeding

• After cutting, proceed with weeding by removing the excess material around the cut design.
• Utilize tools like a hook or tweezers to weed with precision, making sure that only the desired design remains on the polyester backing.

3. Positioning and Transferring the Marking onto the Textile

• Place the textile on the heat press, ensuring the surface is clean.
• Place the design (with the polyester backing still in place) on the desired area of the textile.
• Cover the design with silicone paper to prevent direct contact between the heat press plate and the polyester film.
• Set the heat press to 120°C, apply medium pressure, and press for 20 seconds. The combination of heat, time, and pressure ensures the design adheres well to the textile.

4. Removing the Polyester Backing

• Allow the textile to cool completely before removing the polyester backing.
• Once the textile is cooled, gently peel away the polyester, ensuring that the flock marking remains securely adhered to the textile. Pull the backing slowly at a shallow angle to reduce the risk of detachment.

By following these steps, you will achieve a professional-quality, durable, and well-applied marking on the textile.