Flags

Thickness: 50 microns
Pressing: 160 ° C - 20 seconds - Medium pressure
Washing: 60 ° C - Ironing inside out

Application Instructions :

1. Cut the film right side with a flex blade by optimizing the adjustment of the blade.

2. Weed the excess material.

3. Transfer the design using the transfer tape supplied with the flex.

4. Position and press the marking on the textile, protecting it with siliconized paper at 160°C – 20 seconds – Medium pressure.

5. Remove the transfer tape hot.

Care & Maintenance Recommendations :

• Follow the instructions specified on the garment
• Wait 24 hours before the first wash
• Iron inside out only
• Storage: maximum 1 year, protected from light and humidity
• Washing: maximum 60 ° C inside out
• Do not use aggressive products (bleach, etc.)
• Tumble dryer: Yes

·         Dry cleaning: Not recommended