Application Instructions :
1.Cut the film in mirror mode with a flex blade by optimizing the adjustment of the blade.
2.Weed the excess material.
3.Position and press the marking on the textile, protecting it with siliconized paper at 140°C – 12 seconds – Medium pressure.
4.Remove the polyester warm
Care & Maintenance Recommendations :
· Follow the instructions specified on the garment
· Wait 24 hours before the first wash
· Iron inside out only
· Storage: maximum 1 year, protected from light and humidity
· Washing: 40/60° C inside out
· Do not use aggressive products (bleach, etc.)
· Tumble dryer: Not recommended
· Dry cleaning: Not recommended
- Washing - 40-60°C
- Specific effect - 3D
- Textile compatibility - Cotton, Polyester, Acrylic, Nylon, Similar fibres, Linen
- Ironing - On reverse only