Cricut's World
Product details
Water-based multilayer polyurethane film for laser cutting and peeling for hot transfer.
This product is used for the personalization of all types of standard textiles.
The LaserFlex is for use with a laser cutting machine.
Limited editions: while stocks last.
Features
Composition
Polyurethane
Application time
17 to 20 seconds
Thickness
60 microns
Application temperature
165°C
Peeling
Cold
- Washing - 60°C
- Specific effect - Glossy
- Textile compatibility - Cotton, Polyester, Polycotton, Acrylic
- Ironing - On reverse only
Application Instructions
- Cut the film in mirror mode with a laser cutting machine.
- Position and press the marking onto the textile with its polyester support, protecting it with silicon paper at 165 ° C - 17 seconds - Medium pressure.
- Remove cold polyester. "
Care & Maintenance Recommendations
- Observe the instructions specified on the clothing
- Wait 24 hours before the first wash
- Iron inside out only
- Storage: maximum 1 year, vertically and protected from light and humidity
- Washing: maximum 60 ° C inside out
- Do not use aggressive products (bleach, etc.)
- Tumble dryer: No
- Dry cleaning: No
