Thickness: 160 microns
Pressing: 160°C - 20 seconds - Medium pressure
Washing: 60°C - Iron on reverse side
- Washing - 60°C
- Specific effect - Glossy
- Inks compatibility - Eco-solvent / solvent, Latex
- Textile compatibility - Cotton, Polyester, Polycotton, Acrylic
- Tape - ATT 450, ATT 490, ATT 500
- Certifications - Oeko-Tex, Vegan
- Ironing - On reverse only
1. Printing and cutting
Prepare to print the pattern right side up following the printer operating instructions.
- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flex from the printer and let dry at room temperature for at least 4 hours
2. Hot transfer
- Weed the excess material
- The use of a tape application is not compulsory, it is possible to transfer it by hand. (Do not use a paper tape application).
- Position and press the pattern onto the fabric with medium pressure, protected by silicone paper at 160 ° C - 20 seconds - Medium pressure.
- Remove the hot polyester.
Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only
Storage: maximum 1 year, vertically and protected from light and humidity
Washing: maximum 60 ° C inside out
Do not use aggressive products (bleach, etc.)
Tumble dryer: Yes
Dry cleaning: Not recommended
Emilie K. the 01/08/2023 :
je le trouve tres bien
Anonymous A. the 17/01/2021 :
Très bien