Cricut's World
- Description
- Application Instructions
- Entretien
- Avis
Thickness: 75 microns
Low temperature pressing: 120 ° C - 20 seconds - Medium pressure
Rapid pressing: 140 ° C - 5 seconds - Medium pressure
Nylon pressing: 140 ° C - 15 seconds - Medium pressure
Washing: 40 to 60 ° C - Ironing inside out
- Washing - 60°C
- Specific effect - Glossy
- Inks compatibility - Eco-solvent / solvent
- Textile compatibility - Cotton, Polyester, Nylon, Polycotton, Acrylic
- Tape - ATT 450
- Certifications - Oeko-Tex, Vegan
- Ironing - On reverse only
1. Printing and cutting
Prepare to print the pattern right side up following the printer operating instructions.
- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flex from the printer and let dry at room temperature for at least 4 hours
2. Hot transfer
- Weed the excess material
- Use a tape application to transfer the pattern (do not use a paper tape application).
- Position and press the pattern onto the fabric with medium pressure, protected by siliconized paper at:
Fast mode: 140 ° C - 5 seconds
Remove warm or cold polyester.
Low temperature: 120 ° C - 20 seconds
Remove warm or cold polyester.
Nylon: 2-step installation
- 1st pressing: 140 ° C - 5 seconds
Remove the still warm polyester.
- 2nd pressing: 140 ° C - 15 seconds"
Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only
Storage: maximum 1 year, vertically and protected from light and humidity
Washing: maximum 60 ° C inside out (40 ° C for Nylon)
Do not use aggressive products (bleach, etc.)
Tumble dryer: Yes
Dry cleaning: Not recommended
J'utilise ce flex imprimable qui pour moi est le top du top pour tout ce qui concerne les textiles fins.
Anonymous A. the 13/11/2021
Pas de problème particulier. Flex imprimable de bonne facture et j'en suis ravi.
Anonymous A. the 16/07/2021
parfait
Anonymous A. the 28/01/2021