Cricut's World
- Description
- Application Instructions
- Entretien
- Avis
The perfect blend of quality and performance for your sports textiles!
Are you looking to prevent ink migration on your textiles? Hotmarkprint Sir is the ideal solution for personalizing sublimated polyester and dark-colored textiles without the risk of ink migration. Designed to deliver exceptional performance, this film ensures that your designs remain clear and sharp even after transfer.
This printable heat-adhesive film stands out with its Oeko-Tex Standard 100 Class 1 certification, ensuring that each product meets the highest standards of safety and quality for everyday use. For more details on this certification, please refer to our "Oeko-Tex Label" section.
Hotmarkprint Sir provides a professional and durable finish, allowing you to create high-quality prints on a variety of substrates while maintaining the integrity of colors and designs. Transform your customization projects with the confidence that your creations will be perfectly protected against ink bleed.
Choose Hotmarkprint Sir and benefit from a reliable and effective solution for your sublimated textile transfer projects, guaranteeing high-quality results every time.
Hotmarkprint Sir is a high-performance hot transfer film specifically designed for sublimated polyester textiles. With a thickness of 100 microns, this film offers increased robustness for durable, professional-quality transfers.
For optimal application, pressing should be done at 150°C for 20 seconds with medium pressure. This film produces a shiny finish that enhances your designs with brilliance.
It is compatible with eco-solvent and solvent inks, offering great flexibility for your printing projects.
For maintenance, it is recommended to wash at 60°C and iron on the reverse side to preserve the quality of the transfer.
The recommended application tape for easy and precise application is ATT 490.
Hotmarkprint Sir is your ideal choice for impeccable transfers on sublimated polyester, combining performance, aesthetics, and durability.
1. Preparing the Design for Printing
- Prepare the graphic file ensuring it is set correctly (not mirrored, as the final transfer will be direct).
- Configure the printer according to the specific instructions provided by the manufacturer for the type of flex or vinyl used.
2. Checking Printing and Drying Temperatures
- Ensure that the printing temperature is set correctly to allow proper ink application on the flex.
- Verify that the drying temperature for the inks is also set correctly. This step is crucial for setting the ink without causing smudging or printing defects.
3. Using the Print Profile
- Select the appropriate print profile suited for the type of flex and inks used to ensure accurate color reproduction and optimal drying.
4. Drying After Printing
- After printing, carefully remove the flex from the printer.
- Allow the flex to dry at room temperature for at least 4 hours. This drying time ensures that the inks are properly set before handling or cutting the material.
5. Weeding
- After drying, proceed with weeding by removing the excess material around the printed design.
- Use weeding tools to precisely remove unwanted parts, especially if the design has fine details.
6. Transferring the Design with Application Tape
- Use a specific application tape to transfer the printed design onto the textile. Avoid using paper application tape, as it may burn under heat.
- Position the design on the desired area of the textile, ensuring correct alignment.
7. Pressing the Design onto the Textile
- Place the textile on the heat press, ensuring it is properly positioned and the application area is clean.
- Position the flex (with the application tape still in place) on the desired area of the textile.
- Protect the marking with silicone paper to prevent direct contact between the heat press platen and the polyester film.
- Set the heat press to 150°C, apply medium pressure, and press for 20 seconds. The combination of heat, time, and pressure ensures that the design adheres well to the textile.
8. Removing the Polyester While Hot
- Once pressing is complete, immediately remove the polyester backing while hot, pulling gently to ensure the marking stays well in place.
By following these instructions step by step, you will achieve a high-quality, durable transfer that is perfectly fixed on the textile.
- Follow the care instructions specified for the garment: Adhere to the recommendations specific to the fabric on which the film has been applied to ensure its durability.
- Wait 24 hours before the first wash: This allows the film to fully adhere to the fabric and prevents it from peeling off or deteriorating prematurely.
- Iron only on the reverse side: To protect the transfer and prevent damage from the direct heat of the iron, it is crucial to iron the garment inside out.
- Storage: The film should be stored under optimal conditions, upright, away from direct light and moisture, for a maximum of one year. Improper storage can alter the film’s properties, such as its adhesion or elasticity.
- Washing: The garment can be washed at a maximum temperature of 60°C. It is recommended to wash it inside out to avoid direct friction on the transfer, which could damage it.
- Do not use aggressive products: Detergents containing bleach or other harsh chemicals can deteriorate the film and affect its durability.
- Tumble drying: Tumble drying is allowed, but it is advisable to check the compatibility of the fabric with this drying method.
- Dry cleaning: Not recommended. Dry cleaning could affect the quality of the transfer.
These recommendations are essential to ensure the quality and longevity of the marking on the personalized textile.
Très bon produit Impression avec une eco solvant et séchage 24h00 puis application. Rien n'a bougé. Super produit.
Anonymous A. the 23/10/2023