Thickness: 50 microns
Pressing: 160 ° C - 20 seconds - Medium pressure
Washing: 60 ° C - Ironing inside out
- Washing - 60°C
- Specific effect - Glossy
- Inks compatibility - Eco-solvent / solvent, Latex
- Textile compatibility - Cotton, Polyester, Polycotton, Acrylic
- Tape - ATT 450, ATT 490, ATT 500
- Certifications - Oeko-Tex, Vegan
- Ironing - On reverse only
1. Printing and cutting
Prepare to print the pattern right side up following the printer operating instructions.
- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flex from the printer and let dry at room temperature for at least 4 hours
2. Hot transfer
- Weed the excess material
- Use a tape application to transfer the pattern (do not use a paper tape application).
- Position and press the pattern onto the fabric with medium pressure, protected by silicone paper at 160 ° C - 20 seconds - Medium pressure.
- Remove the hot polyester.
Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only
Storage: maximum 1 year, vertically and protected from light and humidity
Washing: maximum 60 ° C inside out
Do not use aggressive products (bleach, etc.)
Tumble dryer: Yes
Dry cleaning: Not recommended
Frederic M. the 12/08/2023 :
parfait
Anonymous A. the 20/01/2022 :
Très bien !
Anonymous A. the 08/11/2021 :
Bien
Anonymous A. the 10/07/2021 :
tres bien, le plus fin des flex imprimable. très bonne stabilité dans le temps. recule de 5 ans sur des softshell... rien a bougé
Anonymous A. the 03/04/2021 :
Très bon site au top ++++