Thickness: 85 microns
Pressing: 145°C - 15 seconds - Medium pressure
Hand wash - Iron on reverse side
- Washing - Hand wash
- Specific effect - Metallic
- Inks compatibility - Eco-solvent / solvent
- Textile compatibility - Cotton, Polyester, Polycotton, Acrylic
- Tape - ATT 500
- Certifications - Oeko-Tex, Vegan
- Ironing - On reverse only
1. Printing and cutting .
Prepare to print the pattern right side up following the printer operating instructions.
- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flex from the printer and let dry at room temperature for at least 4 hours
2. Hot transfer
- Weed the excess material
- The use of a tape application is not compulsory, it is possible to transfer it by hand. (Do not use a paper tape application).
- Position and press the pattern onto the textile with medium pressure, protected by silicone paper at 145 ° C - 15 seconds - Medium pressure.
- Remove the hot polyester.
Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only Storage: maximum 1 year, vertically and protected from light and humidity
Hand washing
Do not use aggressive products (bleach, etc.)
Tumble dryer: Not recommended
Dry cleaning: Not recommended