Chemica

Hotmarkprint Nylon

€191.85

Matt white heat transfer polyurethane film for light and dark textiles. This product is for use with an eco-solvent, solvent or latex ink printer and requires the use of an ATT450 tape application.

"Hotmarkprint Nylon" is recommended for nylon textile supports such as umbrellas, k-ways, etc.

1992D20

Available in stock

Product details

Thickness: 50 microns
Pressing: 140°C - 20 seconds - Medium pressure
Washing: 40°C - Iron on reverse side

Features
Composition
Polyurethane
Application time
20 seconds
Thickness
50 microns
Application temperature
140°C
Peeling
Hot
  • Washing - 40°C
  • Specific effect - Glossy
  • Inks compatibility - Eco-solvent / solvent
  • Textile compatibility - Nylon
  • Tape - ATT 450, ATT 490, ATT 500
  • Certifications - Vegan
  • Ironing - On reverse only
Application Instructions

1. Printing and cutting

Prepare to print the pattern right side up following the printer operating instructions.

- Check the printing (45 ° C) and ink drying (50 ° C) temperatures of your printer.
- Use the correct printing profile.
- Remove the flex from the printer and let dry at room temperature for at least 4 hours

2. Hot transfer

- Weed the excess material
- Use a tape application to transfer the pattern (do not use a paper tape application).
- Position and press the pattern onto the fabric with medium pressure, protected by silicone paper at 140 ° C - 20 seconds - Medium pressure.
- Remove the hot polyester.

Care & Maintenance Recommendations

Follow the instructions specified on the garment
Wait 24 hours before the first wash
Iron inside out only
Storage: maximum 1 year, vertically and protected from light and humidity
Washing: maximum 40 ° C inside out
Do not use aggressive products (bleach, etc.)
Tumble dryer: Yes
Dry cleaning: Not recommended

Technical datasheets

100% secure
payment

Fast delivery
from 24 to 72H*
*Depending on the carrier

Customer service at
+33 9 67 04 74 21

Certifications
Oeko-Tex and EVE Vegan